.jpg)
3BSpec: 9006 Xenon HID Kit - 35w AC Digital
3BSpec Plug-and-Play HID Xenon Conversion Kit
Kit comes with:
(2) Xenon bulbs
(2) HID Ballast
-- 35w Digital Ballasts: Standard output seen on all OEM HID cars.
Plug-and-Play or Relay Wiring Harness
Installation Guide (now posted online)
Mounting Hardware
1-Year standard warranty. 3-Year extended warranty optional.
To check what kit you will need for your car, please visit Sylvania's
Bulb Replacement Guide
Bulbs often go by multiple names. The following are the cross references.
| HB1 = 9004 | H10 / 9145 = 9005 HID |
| HB2 / 9003 = H4 | H13 = 9008 |
| HB3 = 9005 | 9012 = 9006 HID |
| HB4 = 9006 | 9011 = 9005 HID |
| HB5 = 9007 | H11B = H11 HID |
| H8 / H9 = H11 HID | 2504 = 5202 HID or P13W Verify before ordering |
Click on a kelvin rating below to see the color.
Note: 50w ballasts will optically drop the temperature 1000k when compared to similar bulbs using 35w ballasts.
Note: Headlight and fog light housing sizes will affect the color output. Refraction housings and dirty headlights will emit more color than clear reflector housings.
| Kelvin colors |
||
 5000k |
 6000k |
 8000k |
 10,0000k |
 12,0000k |
 3000k |
 Blue |
 Purple |
 Green |
 Pink |
| Harness Options: |
|
-- Plug-and-Play Harness: Allows you to connect directly from the headlight socket to the ballast. Applicable to most vehicles. |
 Click above image to enlarge |
| ---------------------------------------- | |
-- Relay Harness: Some vehicles may require a relay harness to operate properly. Note that the use of a relay harness, negates all benefits of running Canbus ballasts. Notable vehicles that these are recommended on. |
 Click above image to enlarge |
| ---------------------------------------- | |
-- Warning Canceler Harness: Required for vehicles with Canbus ECU's. Designed to eliminate the lamp out error and flickering, caused by the vehicle's ECU. These work on 98% of vehicles that require a warning canceler. This list is by no means comprehensive and we keep an internal application chart for vehicles based on customer feedback and local experience. |
 Click above image to enlarge |
| ---------------------------------------- | |
-- 50w Relay / Resistor Harness: Specialty relay harness for vehicles that are unresponsive to warning cancelers. This relay / terminator harness is designed to simulate the load from a stock halogen bulb. This list is by no means comprehensive and we keep an internal application chart for vehicles based on customer feedback and local experience. 50w Resistor / Relay Instruction
|
 50w Resistor Relay Click above image to enlarge  50w Terminator Click above image to enlarge |
Click here for all HID instructions
Click here for the Ballast Specs
Click here for the Ballast FAQ
Click here for the Harness FAQ
Click here for the Warranty / Return FAQ
Shipping Notes:
Standard shipping is sent by USPS Priority
Warranty and Returns:
- Returns are limited to 14 business days after receiving the shipment.
- Customer will be responsible for shipping on all returns.
- There is a 15% restocking fee on all returns.
- Defective parts will be replaced at our discretion, and limited to the replacement of one full HID kit.
- Warranties for these kits are handled in-house. Customer may be subject to shipping and service charges for warranty parts.
- Any charges accrued for shipping, removal, installation, or re-installation will not be covered.
Disclaimer: For off-road use only.
|
|
|
|
- Item #: HID-9006/35wAC
